SOLUTION CLUSTER

Mooring Systems

Site-specific mooring design for aquaculture and marine structures.

MANIFESTO

We design site-specific mooring systems for floating fish cages, workboats and marine structures. Depth, bathymetry, current, wave and wind data inform the selection of anchor layout, ropes, chains, buoys and connectors. Design conditions and load scenarios are assessed within the project scope, alongside installation and maintenance requirements.

Interactive visual explainer

Fish Farm Analysis

The first question asked when a fish farm mooring system is designed is this: when the current arrives, where does the load travel from and to? The cages cut across the current, the net billows and the cage is dragged downstream; that movement is transferred from the corner connections to the subsurface grid, and from there to the mooring legs on the side the current comes from. The arrangement of the cages, the geometry of the grid and the orientation of the anchors determine how that transfer is distributed. The rear cages sit in the wake of the ones in front, so the order of the rows is a design decision too.

The visual below is there to explain that idea, and it is interactive. You can change the current speed and direction, rotate the scene, and tap a cage or a mooring leg. The farm layout is fixed; the scene carries no calculation result, measurement, capacity or strength value.

A standalone, schematic visual. The flow traces open out in front of the cages and close in behind them, slowing in the wake behind the net. The drag on the cages is passed to the corner nodes and from there, along the grid lines, to the anchors on the side the current comes from. It is not a real site, a measurement, an engineering calculation or a CFD solution.

Drag: rotate  /  Scroll: zoom
Tap a cage or a mooring leg.
Settings
Scenario input — not a measurement, a site value or a strength claim.
Plan direction: 0° = +X, 90° = +Y; this is not geographic north. The arrow shows the direction the water travels towards; the farm and the anchor positions do not rotate.
Scenario input — wind strength on the Beaufort scale. The wave motion in the scene is its schematic counterpart; it is not a sea state forecast, a wave height or a measurement.

Inspect

Depth and local dye

Source: —The plane shows the existing schematic flow field; it is not a new solution. With the plane on, tap an empty point on it to choose a source; selecting a cage returns the source to the front of that cage.

The scene is schematic and not to scale. It shows no force, capacity, safety, strength or wave value.

Animation 00:00
Flow traceslowfast· relative to the incoming flow; density is not speed

Schematic visual · It is there to give a general idea. It cannot be used as an engineering calculation or as a design reference.

A schematic underwater account

Ten cages set out in two columns and five rows; a subsurface grid whose nodes sit at the cage corners (18 in all); a buoy at every node; 18 mooring legs running from the perimeter nodes along the grid axes (two at each corner, one on each side). The four inner nodes carry no anchor. The layout is fixed; only the current speed, the current direction and the Beaufort input can be changed. It is entirely fictional and not to scale.

  • Flow traces: a schematic field that opens out in front of the permeable cage, closes in behind it and slows in the wake. The length of the wake behind a cage follows the size of the cage, not the speed; the length of the particle traces, by contrast, is proportional to the speed. Colour is speed relative to the near-surface incoming flow that the cages have not affected (including the slowdown near the bottom); particle density does not mean speed. No vortices or oscillation are shown.
  • Load path: the relative drag on each cage grows with the local speed of the incoming flow (including the wake of the cage in front of it) and is distributed to the corner nodes, weighted towards the corners facing the current. Load is collected along the grid rows and columns; the anchors on the side the current comes from carry most of it. The load path of the selected cage is highlighted only to show the direction of this transfer; no numerical value, ratio or rating is shown. This distribution is not a real load-sharing calculation.
  • Direction is plan direction (0° = +X, 90° = +Y); it is not geographic north.
  • Waves: the Beaufort input only sets how strong the wave motion in the scene is. The surface, the rise and fall of the cages and the foam are entirely schematic; no wave height, wave period, sea state or vessel or structure behaviour is calculated or shown. Current and waves are separate inputs in the scene.
  • The scene carries no numerical value, rating or indicator. No element expresses force, capacity, breakage, safety or conformity to a standard.
  • The anchor and chain symbols are schematic; no anchor type is recommended.
  • The depth plane shows the existing flow field at the selected layer; it is not a new solution. Local dye is released from the front of the selected cage or from the point selected on the plane. The ghost is a neutral no-current reference.

The file works offline; it makes no network requests. Keyboard: arrow keys camera · +/− zoom · Space pause · R reset view · K / Shift+K cage · H / Shift+H mooring leg.

CORE

Core Products

CORE

Mooring Buoy

Rotomoulded polyethylene mooring buoys for aquaculture mooring legs, harbour berthing points and navigation marking. 8 standard models, MB300 to MB4000 — 300 to 4,000 litre volume, 150 to 2,000 kg mooring load. UV-stabilised body, closed-cell internal fill, hot-dip galvanised steel hardware. ASAKUA is an IALA Affiliate Industrial Member.

DETAILS →
CORE

PP Mooring Rope

Polypropylene mooring and lashing rope supplied for aquaculture and marine operations. Dimensions and minimum breaking loads are presented in the catalogue table.

DETAILS →
CORE

Mooring Hardware

Forged steel shackles, mooring chain, swivels, master links and connection plates for cage mooring and marine applications. Hot-dip galvanised, 2–150 tonne WLL range, supplied through engineering selection.

DETAILS →

Let's discuss your project.

Get in Touch →
Fish Farming →
Marine Craft →